Using The Quick Menu; Using Sequence Mode; Adjusting Color Settings - Lorex LNR100 Instruction Manual

8 Using the System

8.2 Using the Quick Menu

The Quick menu gives you access to the system's key functions. To access the Quick
Menu, right-click the screen during live view.
The Quick Menu has the following options:
• View: Select a camera in full-screen or select a multi-channel display.
• Pan/Tilt/Zoom: Access controls for PTZ cameras (not included).
• AutoFocus: Access zoom/focus controls for auto-focus cameras (not included).
• Color Setting: Configure color settings for cameras.
• Search: Search/playback recorded video. See 11 Search (Playback), page 29.
• Record: Open the Record menu to select manual recording options. See 10.3 Setting
up Scheduled or Manual Recording, page 27.
• Device Search: Open the Device Search menu to manage IP cameras.
• Info: Opens the system information window.
• Sequence: Click to start/stop sequence mode. In sequence mode, the system will au-
tomatically cycle through connected cameras every few seconds.
• Main Menu: Open the Main Menu. See 14 Using the Main Menu, page 42.

8.3 Using Sequence Mode

In sequence mode, the system will automatically cycle through connected cameras every
few seconds.
To use sequence mode:
1. Right-click and select Sequence to start sequence mode. A
that sequence mode is on.
2. Click the icon to pause sequence mode on the channel that is currently shown (icon
changes to ). Click again to resume sequence mode.
3. Right-click and select Sequence to return to normal viewing mode.

8.4 Adjusting Color Settings

Use the Color Settings menu to adjust color settings for your cameras.
To adjust color settings:
1. Right-click on the channel you would like to configure and select Color Setting. Enter
the system password if prompted.
#; r. 2.0/23308/23308; en-US
will appear to show
19