Configuring Display Settings - Lorex LNR100 Instruction Manual

14 Using the Main Menu
7. To configure a schedule when motion detection will be enabled on this channel, click
Setup next to Period.
• Configure times when motion detection will be enabled. For example, you may want
to disable motion detection during business hours and enable it outside of business
hours. Click OK when finished.
NOTE
This setting can override scheduled motion recording. This means that motion recording will only
take place at times that are enabled both in the Schedule menu and here.
8. Configure the following system actions when motion is detected:
• Show Message: Check to enable an on-screen pop-up. On-screen pop-up shows
the channels an event occurred on and the type of event.
• Alarm Upload: Upload events to FLIR Cloud™ Client.
• Send Email: Check to enable email alerts. You must configure email alerts before
you will be able to receive them (see 14.3.4 Configuring Email Alerts, page 60).
• Record Channel: Select the channels that will record when motion is detected on
the selected channel.
• PTZ Activation: If you have PTZ cameras (not included), you can have them auto-
matically go to a preset position when motion is detected. Check PTZ Activation to
enable this feature. Then click Setup to select which presets each camera should
go to when motion is detected on the selected channel. Click OK to confirm.
• Buzzer: Check to enable the system buzzer.
• Snapshot: Check to attach a .jpg image of the camera when sending email alerts.
9. Click Save to save changes.

14.1.8 Configuring Display Settings

The Display menu allows you to configure the system's display settings, such as the moni-
tor resolution.
#; r. 2.0/23308/23308; en-US
51