Formatting Hard Drives - Lorex LNR100 Instruction Manual
Hide thumbs
Also See for LNR100:
- Instruction manual (182 pages) ,
- Quick connection manual (2 pages) ,
- Quick mobile manual (2 pages)
Table of Contents
Advertisement
18
LNR100 Series Hard Drive Installation
7. Replace the cover and cover screws (6x).
NOTE
After installation, you must format the hard drive in order to use it with the system. See 18.3 Format-
ting Hard Drives, page 147.
18.3 Formatting Hard Drives
You must format hard drives before you may use them with the system.
CAUTION
Formatting the HDD erases all data on the hard disk. This step cannot be undone. System settings will
not be erased.
To format a hard drive:
1. From Live View, right-click and select Main Menu.
2. Click
>HDD Management.
3. Configure the following:
3.1.
Under HDD No., select the hard drive you would like to format. Information
about the hard drive appears in the lower section of the menu.
3.2.
Under Set to, select Format.
3.3.
Click Apply. Click OK to confirm. Wait for the hard drive to format. Hard drives
become Read/Write hard drives by default when formatted.
#; r. 2.0/23308/23308; en-US
147
Advertisement
Table of Contents
