Configuring Ntp - Lorex LNR100 Instruction Manual

9 Setting The Time
To configure automatic daylight savings time updates:
1. In the General menu, check DST to enable auto Daylight Savings Time updates.
2. Click Set to adjust the start time and end time of Daylight Savings.
• Day of Week: Check to set the start and end time based on a day and week (e.g.
2nd Sunday in March).
• Date: Check to set the start and end time to a specific date.
• Start: Enter the start time for daylight savings.
• End: Enter the end time for daylight savings.
• Click OK.
3. Click OK at the bottom of the General menu to save changes.

9.2 Configuring NTP

NTP allows you to sync your system time with an Internet time server.
NOTE
Your system must have a constant connection to the Internet to use NTP.
#; r. 2.0/23308/23308; en-US
25