Lorex LNR100 Instruction Manual page 156
Hide thumbs
Also See for LNR100:
- Instruction manual (182 pages) ,
- Quick connection manual (2 pages) ,
- Quick mobile manual (2 pages)
Table of Contents
Advertisement
18
LNR100 Series Hard Drive Installation
3. Loosen the hard drive screws (4x), but do not remove them.
4. Carefully turn the NVR over and remove the cover. The easiest way to do this is to pull
up on the edge that hangs over the rear panel of the unit.
5. Disconnect the SATA power and data cable from the hard drive.
6. Slide the hard drive towards the front of the NVR and remove it from the unit.
146
#; r. 2.0/23308/23308; en-US
Advertisement
Table of Contents
