Using Video Clip Backup; Viewing Backup Files - Lorex LNR100 Instruction Manual

12 Backup
8. Check files you would like to backup and then click Start. Wait for the backup to
complete.
NOTE
HD video files saved on the system may take up a large amount of disk space. The size of video files
selected and the amount of free space on your USB device is shown at the bottom of the screen.

12.3 Using Video Clip Backup

Video clip backup allows you to select a duration of video during playback mode and save
it to a USB device (not included).
To use Video Clip Backup:
1. Insert a USB flash drive (not included) or USB external hard drive (not included) into
one of the USB ports.
2. Start playing back video using the steps in 11.1 Playing Back Video from the Hard
Drive, page 29.
3. Click to mark the beginning of the video clip. Click
video clip.
4. Click to open the Backup menu.
5. Configure the following:
5.1. Check the USB device where you would like to save the file.
5.2. Check the files you would like to backup.
5.3. Click Backup. Wait for the backup to complete before removing the USB flash
drive.

12.4 Viewing Backup Files

To playback .dav backup video files, a Player is automatically installed on the USB device
when you save a backup file.
NOTE
The Player is PC compatible only. For Mac users, make sure to save backup files in .asf format (select
ASF under File Format). You can playback .asf backup video files in VLC Media Player (free download
from www.videolan.org) on PC or Mac.
VLC Media Player is not supported by Lorex.
#; r. 2.0/23308/23308; en-US
to mark the end of the
34