Using The Mouse; Adding Cameras From The Lan; Setting The Date And Time; Using The Quick Menu - Lorex LNR100 Series Quick Connection Manual

Using the mouse

1. Left-click:
• Click to open the Navigation Bar.
Right-click to close the Navigation Bar.
• During split-screen display mode:
Double-click an individual channel to
view it in full-screen. Double-click again
to return to the split-screen display mode.
• While navigating menus: Click to
open a menu option.
2. Right-click:
• During live view: Right-click anywhere
on the screen to open the Quick Menu.
• Within system menus: Right-click to
exit menus.

Using the Quick Menu

Right-click to open the Quick Menu.
Select camera/live display view
Control PTZ cameras (not included)
Not supported
Adjust color settings
Search and playback recordings
Open manual recording controls
Add IP cameras over the LAN
View system information
Start/stop sequence mode
Open Main Menu
Quick Connection Guide

Adding cameras from the LAN

Follow the steps below to add cameras that are not directly connected to the Power over
Ethernet (PoE) ports on the back of the NVR.
NOTE:
Please visit www.lorextechnology.com/support
cameras.
1.
Connect the camera to a router or switch on the same network as the NVR.
1 2
2.
Right-click and select Device Search. Log in using the admin account (default User
Name: admin; default Password: 000000).
3.
Click IP Search.
Check the camera(s) you would
4.
like to add.
5. Click Add. The Status indicator
turns green to show the camera is
successfully connected.
6.
Click OK to save changes.

Setting the date and time

1. In live view, right-click and click Main Menu.
2. Log in using the system user name (default: admin) and password (default: 000000).
3. Click and
select General.
4. Enter the current date (MM DD YYYY) and time (HH MM SS) under System Time.
Set the date and time. Click Save.
It is important to set the correct time to ensure accurate time stamps on video recordings.
HD Network Video Surveillance Recorder
1. From live view, right-click and then click Search.
for a list of compatible Lorex IP
Log in using the system user name (default: admin)
2.
and password (default: 000000).
Use the calendar on the right to select the date to
3.
playback.
4. Use the drop-down menus to select the channels you
would like to playback. Click the display options
(
Click inside the video bar to select the playback time.
5.
Playback starts immediately at the selected time.
Set the date and time.
Click OK.
NOTE:
See the manual on
lorex.ca/LNR100 for details on
configuring Daylight Savings Time
and Network Time Protocol.
Click OK to save changes.
LNR100 Series
Playback and search
) to playback multiple channels simultaneously.
Click inside the bar to select a
playback time.
LNR100_Series_QCG_EN_R2
30 Minutes
Select the day
to playback
Select channels
to playback