Configuring System Ports - Lorex LNR100 Instruction Manual
Hide thumbs
Also See for LNR100:
- Instruction manual (182 pages) ,
- Quick connection manual (2 pages) ,
- Quick mobile manual (2 pages)
Table of Contents
Advertisement
14
Using the Main Menu
2. Click
>Network.
3. Check DHCP to use DHCP or un-check to use a static IP address. If you un-check
DHCP, configure the following:
• IP Address.
• Subnet Mask.
• Gateway.
• Preferred DNS.
• Alternate DNS.
4. Click Save to save your changes. Restart the system to update the IP address.
14.3.2 Configuring System Ports
The Connection menu allows you to configure ports used by the system. Please note that
port forwarding is not required to use FLIR Cloud™ or to connect using the apps.
If you are using DDNS connectivity, port forwarding is required for the HTTP Port (defaut:
80) and TCP (Client Port) (default: 35000).
To configure system ports:
1. From live view, right-click and select Main Menu.
2. Click
>Network.
#; r. 2.0/23308/23308; en-US
58
Advertisement
Table of Contents
