Configuring Privacy Zones - Lorex LNR100 Instruction Manual

14 Using the Main Menu
To configure recording quality settings:
1. From the Main Menu, click
2. Configure the following settings. Settings for the Main Stream are in the left column.
Settings for the Sub Stream are in the right column.
• Type: For the Main Stream, you can set different recording quality settings for Con-
tinuous, MD (Motion Detect), and Alarm recording. Select the type of recording
you would like to configure.
• Under Channel, select the channel you would like to configure.
• Under Resolution, select the resolution for the selected recording type.
• Under Frame Rate, select the frame rate for the selected recording type on the left.
Select the frame rate for the sub-stream on the right.
• Under Bit Rate Type, select CBR (Constant Bit Rate) or VBR (Variable Bit Rate) for
the selected recording type on the left and sub-stream on the right. If you select
VBR, select the Quality from 1 (lowest) to 6 (highest).
• Under Bit Rate (Kbps), select the bit rate for the selected recording type on the left
and the sub-stream on the right.
• Under Audio/Video, check the box on the far right to enable video streaming to re-
mote users (un-check to hide the channel from remote users.
NOTE
Audio recording is not supported.
• (Optional) To copy settings to other channels, click Copy, select channels to apply
settings to, and click OK.
3. Click OK to save changes.

14.1.4 Configuring Privacy Zones

Privacy Zones allow you to block out up to 4 portions of each channel with a black square.
CAUTION
Areas covered by privacy zones are not visible in recordings.
#; r. 2.0/23308/23308; en-US
and then click Recording.
46