Creating Custom Channel Names - Lorex LNR100 Instruction Manual

14 Using the Main Menu
To configure display settings:
1. From the Main Menu, click
2. Configure the following, as needed:
• Resolution: Select the correct resolution for your monitor. The system will reboot
when you save changes.
• Transparency: Select the menu transparency between 0 (lowest) and 100
(highest).
• Time Display: Check to show the system time on the monitor.
• Channel Display: Check to show channel names on the monitor.
• Image Enhance: Check for the system to digitally improve the video quality on the
live display. This setting does not affect recordings.
3. Click OK to save changes.

14.1.9 Creating Custom Channel Names

You can assign custom channel names to your cameras. This is useful as it allows you to
refer to cameras based on their location (for example Hallway instead of CAM1).
To create custom channel names:
1. From the Main Menu, click
#; r. 2.0/23308/23308; en-US
and then click Display.
and then click Display.
52