Dscp Remark - Planet Networking & Communication WGSW-48000 User Manual

4.8.6 DSCP Remark

This Managed Switch supports the Packet Remarking. Remarks can be made on the DSCP filed if the outgoing packet is an IP
packet. Select an ACL Entry Name as the criterion and then enter New DSCP Value as the action. Once the criterion is hit, the
DSCP value will be changed.
The page includes the following fields:
Object
• ACL Entry Name
• New DSCP Value
ACL / DSCP mapping table
The incoming packets match ACL entry "High_DSCP_ACL" will be marked with DSCP value "63".
Figure 4-8-11 DSCP Remark configuration screenshot
Description
selects a ACL entry as the criterion.
indicates new DSCP value of the outgoing packet
Figure 4-8-12 DSCP Remark table
121
User's Manual of WGSW-48000