Spanning-Tree Priority - Planet Networking & Communication WGSW-48000 User Manual

Mode
Interface Config

spanning-tree priority

Description:
This command configure RSTP port priority:0~240
Syntax:
spanning-tree priority <0..240>
Parameters:
<0..240>
Mode
Interface Config
6.4.6 VLAN Command
vlan participation
This command join or leave a port to a vlan.
vlan participation exclude
Description:
This command is used to leave a vlan.
Syntax:
vlan participation exclude < vlan id>
Parameters:
< vlan id>
Mode
Interface Config
vlan participation
Description:
This command join a vlan with untagged/tagged mode.
Syntax:
vlan participation {untagged |tagged}< vlan id>
Parameters:
{untagged |tagged}
< vlan id>
Mode
Interface Config
272
User's Manual of WGSW-48000