Table of Contents
Advertisement
The page includes the following fields:
Object
• Enable Port Self
Loop Detection
• Recover Time
(Seconds)
4.11.18 BOOTP Configure Download
BOOTP Configure Download is a feature of download switch configure file from the special TFTP server automaticly. Enable
DHCP Client and DHCP Server assigned the Switch IP Address, at the same time the Switch can acquire the Option 66/67
message (bootp file name & TFTP server IP) from the DCHP Packet or BOOTP Packet. According to these message, Switch
use tftp client download the special configure file from the special TFTP Server. When switch download succeed, these
message will be saved. Next time Switch get the different file name or TFTP server IP, and try to download the new configure file
again.
Enable DHCP Client and should have a DHCP Server or BOOTP Server support Option 66/67.
Description
Enable or Disable port self loop detection function on the Managed Switch.
Specifies port recover time value, 0 indicate the port will not auto recover.
Figure 4-11-18 BOOTP Configure Download
154
User's Manual of WGSW-48000
Advertisement
Table of Contents
