Gearshift System - Suzuki GSX-R750 Service Manual

GEARSHIFT SYSTEM

GEARSHIFT SHAFT/GEARSHIFT ARM DISASSEMBLY
• Remove the following parts from the gearshift shaft/gearshift
arm.
1 Washer
2 Circlip
3 Gearshift shaft return spring
4 Gearshift cam drive plate
[ 09900-06107: Snap ring pliers
GEARSHIFT SHAFT/GEARSHIFT ARM INSPECTION
• Inspect the gearshift shaft/gearshift arm for wear or bend.
• Inspect the return springs for damage or fatigue.
• Replace the arm or spring if there is anything unusual.
GEARSHIFT SHAFT/GEARSHIFT ARM REASSEMBLY
• Install the following parts to the gearshift shaft/gearshift arm as
shown in the right illustration.
1 Washer
2 Circlip
3 Gearshift shaft return spring
4 Gearshift cam drive plate
[ 09900-06107: Snap ring pliers
NOTE:
When installing the gearshift shaft return spring, position the stop-
per B of the gearshift arm between the shaft return spring ends
A .
5 Plate return spring
6 Washer
7 Circlip
5 Plate return spring
6 Washer
7 Circlip
ENGINE 3-45