4-72 FI SYSTEM AND INTAKE AIR SYSTEM
STV ACTUATOR ADJUSTMENT
1st step:
• Set the STV actuator to adjustment position. (4-61)
2nd step:
• Turn out the No.2 cable adjuster 1 until the outer cable play A
becomes zero.
NOTE:
Make sure that outer cable end is fixed into the rubber stopper B .
3rd step:
• Turn out the No.1 cable adjuster 2 to obtain a cable slack C of
0 – 1.0 mm (0 – 0.04 in).
No.2
No.2
cable
cable
No.2 cable
No.2 cable
No.1 cable
No.1 cable
No.1 cable
No.1 cable
0 – 1.0 mm
0 – 1.0 mm
(0 – 0.04 in)
(0 – 0.04 in)