7-14 ELECTRICAL SYSTEM
STARTER MOTOR REMOVAL AND
DISASSEMBLY
• Disconnect the starter motor lead wire. ( 3-6)
• Remove the starter motor. ( 3-16)
• Disassemble the starter motor as shown in the illustration.
10 N . m (1.0 kgf . m, 7.0 lb-ft)
STARTER MOTOR INSPECTION
CARBON BRUSH
Inspect the brushes for abnormal wear, crack or smoothness in
the brush holder.
If the brush has failed, replace the brush sub assy.
1 O-ring
2 Housing end (inside)
3 Starter motor case
4 Armature
5 Brush holder and spring
6 Housing end (outside)