Remounting - Suzuki GSX-R750 Service Manual

6-58 CHASSIS
• Assemble the cushion rod onto the swingarm. ( 6-58)
! Cushion rod mounting nut: 78 N . m (7.8 kgf . m, 56.5 lb-ft)
! ! ! !
• Install the torque link and tighten the rear torque link nut.
! Torque link nut (Front): 28 N . m (2.8 kgf . m, 20.0 lb-ft)

REMOUNTING

Remount the swingarm in the reverse order of disassembly and
removal, and pay attention to the following points.
SWINGARM PIVOT THRUST CLEARANCE ADJUSTMENT
Adjust swingarm pivot thrust clearance as following procedure.
• Insert the swingarm pivot shaft and tighten it to the specified
torque.
! Swingarm pivot shaft: 15 N . m (1.5 kgf . m, 11.0 lb-ft)
! ! ! !
• Hold the swingarm pivot shaft 1 with a 27 mm socket wrench
and tighten the swingarm pivot nut 2 with a 36 mm socket
wrench to the specified torque.
! ! ! Swingarm pivot nut: 100 N . m (10.0 kgf . m, 72.5 lb-ft)
! !
• Tighten the swingarm pivot lock nut to the specified torque
with the special tool.
[ [ [ [ 09940-14970: Swingarm pivot thrust adjuster lock nut [
wrench
! ! Swingarm pivot lock nut: 90 N . m (9.0 kgf . m, 65.0 lb-ft) !
! !