Mode; Scale - Kurzweil Forte Musician's Manual

Multi Edit Mode
CONTROLS Page
First, use the Channel /Zone buttons to the left of the display to select the desired zone that
you wish to assign a controller for. Next, on the CONTROLS page, use the cursor buttons
to select the "Controller" field, hold the Enter button on the alphanumeric pad and then
move any of the Forte's physical controllers. This will select that controller and display its
available parameters. (You can also scroll through the list of controllers on the Control page
by selecting the Controller field with the cursor buttons and using the Alpha Wheel or the
Value buttons to scroll through the list.)
Select a Continuous controller from the list above, the Continuous controller parameters are
described below.

Mode

Continuous Controllers have two modes: Off, or MIDI CC.
With a value of Off, the controller is disabled for this zone.
With a value of MIDI CC, the controller has the ability to transmit MIDI control messages.

Scale

After you've selected a continuous physical controller, you can modify the controller's
response in a similar way that you can modify velocity response.
Scale lets you amplify or diminish the action of the controller. Full scale is 100%. Higher
values will make the controller more sensitive, and lower values will make it less so. Setting
the scale to a negative number makes the controller action work in reverse. As with velocity,
you can use a controller to crossfade between two zones by setting the scaling for one zone
positive and the other negative. Maximum scale values are +300% and -300%.
9-20
FORTE CONTINUOUS
CONTROLLERS
Mod Wheel
PitchUp
PitchDown
CC Pedal 1
CC Pedal 2
Pressure
Slider A
Slider B
Slider C
Slider D
Slider E
Slider F
Slider G
Slider H
Slider I