Program Pages; Params Page; Parameter - Kurzweil Forte Musician's Manual

Program Pages

The parameters for each page in Program Edit Mode are explained in detail below.

PARAMS Page

Press the PARAMS soft button to display the Parameters page (see above.)
The Parameters page allows you to access all of the controllable parameters for the current
program. The parameters page will also display any available VAST synthesis parameters
for the current program and parameters for the current program's insert and auxiliary 1&2
effects (if effects are in use.) All available parameters are listed. For each parameter you can
set a MIDI value as well as a control source.
The left column lists the available parameters, the center column shows the control source
(either a physical controller or MIDI CC number) which that parameter is controlled by, and
the right column shows the MIDI value for each parameter.

Parameter

Use the cursor buttons to select a parameter in the left column, and use the Alpha Wheel,
Value buttons, or cursor up/down buttons to scroll through parameters in that column.
Parameter
Parameter Program / Effect Chain dependent
Control Physical controller or MIDI CC
Value
Range Of Values
None, 0 to 127
Program Edit Mode
Program Pages
Default Value
-
None
None
7-3