Type; On Value; Off Value; Entry State - Kurzweil Forte Musician's Manual

Type

The Type parameter determines the switching behavior of Foot Switches and buttons. This
is a Common parameter that affects all Zones.
A momentary switch is one that is only in the "on" state when it is pressed.
Momentary
As soon as you release the switch, it goes into the "off" state.
A toggled switch is one that maintains its state after it is pressed. So, if the
Toggled
switch is currently in the "off" state, pressing it once will put it in the "on"
state. Pressing it again will put it back in the "off" state.

On Value

The On Value is the MIDI value sent when a switch controller is set to On. You can set this
parameter to any number between 0 and 127, or to None.

Off Value

The Off Value is the MIDI value sent when a switch controller is set to Off. You can set this
parameter to any number between 0 and 127, or to None.

Entry State

The Entry State parameter determines the state of the Foot Switch or button that is sent as a
MIDI message when the current Multi is loaded. You can set this parameter to None, On, or
Off. This parameter is common to all Zones.
None can be entered with the alphanumeric function of the Category buttons as -1.
Multi Edit Mode
CONTROLS Page
9-17