Program Edit Mode
Program Pages
FX Page
Press the FX soft button to call up the FX page (Effects page). Use this page to apply audio
effects to a program. You can choose an effects chain for insert effects and an effects chain
for auxiliary effects 1 and 2.
The Forte's chains contain a variety of effects including different types of reverb, chorus,
delay, flanger, phaser, tremolo, panner, leslie, distortion, EQ, compression, filter, envelope
following filter, frequency stimulator, ring modulator, frequency offset, pitch LFO, and
stereoizer. The parameters and range of values for this page are summarized below.
Insert
Aux 1
Aux 1 Send
Aux 2
Aux 2 Send
Aux 2 Send (Piano Programs)
Output
Pre/Post Ins
Insert
Choose an effects Chain that will be applied to the current program. If you only need to use
one Chain at a time on one MIDI channel, Insert effects may be all you need. If you plan
to use multiple programs on different MIDI channels, it is best to use both Insert and Aux
effects (see Aux below). Aux effects have the advantage of being available to all programs on
each MIDI channel at the same time.
7-6
Parameter
Effect list (See Appendix F)
Effect list (See Appendix F)
0 to 100%
Effect list (See Appendix F)
0 to 100%
Off, -95dB to 24dB
Main, Sec
Post, Pre
Range Of Values
Default Value
0 None
0 None
0%
0 None
0%
Off
Main
Pre