Naming A User Multi - Kurzweil Forte Musician's Manual

Multi Mode
Save User Multis

Naming a User Multi

To rename the Multi, first press the Rename soft button. You will see the naming screen in
the display.
The display shows the current Multi name. Multi names can total 16 characters in length.
Use the letters and numbers printed on the Category buttons to enter the new Multi name.
Rotating the Alpha Wheel or using the Value buttons can also change the Multi name.
Use the Left/Right cursor buttons or <<< >>> soft buttons to move the cursor. Press the
+/- button to switch between upper and lower case characters (all characters will be upper
case until you press the +/- button again).
Use the Space button to change the current character to a space, the Insert button to insert a
blank space (the selected character and all characters to the right will move one space to the
right), and the Delete button to delete the current character (all the characters to the right
will move one space to the left).
8-17