Transpose; Piano Mode - Kurzweil KA-120 User Manual

Transpose

Transpose function allows the overall pitch of the instrument to be
transposed up or down by a maximum of one octave in semitone
increments.
1.
Holding down the [SHIFT] button and press the [TRANSPOSE]
button to enter transpose settings. LCD displays the current
transpose: "***Transpos".
2.
When LCD displays "***Transpos", use [TRANSPOSE-]/
[TRANSPOSE+], [+/YES]/ [-/NO] or data dial to change transpose
value. The max range is ±12 semitones.
3.
Press the[+/YES] / [-/NO] buttons or [TRANSPOSE-] /
[TRANSPOSE+] simultaneously to restore the transpose value to its
default setting: "000Transpos".
Notes:
1. Playing in G key, set the transpose to -05 or 007, and then you can
play the G scale using C scale keys.
2. Transpose setting is applied to automatic chord accompaniment and
full keyboard.

Piano mode

This function is to set the voice of the whole keyboard to the piano
instantly.
1.
Press the [PIANO] button to enter/exit piano mode.
2.
In piano mode, the accompaniment control is the same to other
mode. The accompaniment only plays the rhythm part.
Note:
In piano mode, the CHORD MODE function is automatically turned off.
Advanced Use
SHIFT
TRANSPOSE
PIANO
/ YES
/ NO
13