Zone Parameters; Overview Page - Kurzweil Forte Musician's Manual

Zone Parameters

Each of the four Zones in a Multi has multiple parameters that determine its behavior. Since
the Zones of a Multi are independent of each other, changing a parameter for a certain
Zone will not affect the parameters of any other Zone. There are some exceptions to this,
for example, the parameters on the Common Page are common to all 4 Zones. Also, on the
Controllers Page for Switch Controllers, the parameters Type, Entry State, and Exit State
are common to all 4 Zones. Lastly, on the Controllers Page for Continuous Controllers, the
parameters Entry Position and Exit Value are common to all 4 Zones.
The Zone parameters for each page are explained in detail below.

OVERVIEW Page

The Overview Page shows all 4 Zones in an easy graphical layout. The current Program,
Volume and Panning position of the Zone, along with the state and active keyboard region
can be quickly set on this page.
Status
Program
Key Range
Pan
Volume
Parameter
Active, Muted
Program List
C-1 to G9
None, 0 to 127
None, 0 to 127
Range Of Values
Multi Edit Mode
Zone Parameters
Default Value
Active
-
C-1 to G9
64
127
9-5