Table of Contents
Advertisement
CC484/CC486/CC488 | Operators Manual | 1.
1.
Introduction
Congratulations on selecting the Solution Ultima
Series Control Panel (models
CC484/CC486/CC488) to protect you and your
property. To obtain the most from your unit, take
time to read through this manual and familiarise
yourself with the numerous outstanding operating
features of this system. In all aspects of planning,
engineering, styling, operation, convenience, and
adaptability, we have sought to anticipate your every
possible requirement.
Programming simplicity and speed were some of the
major considerations and we believe that our
objectives in this area were more than satisfied.
This manual explains all aspects of operating the
control panel. All system parameters and options are
detailed; however, suitability is left up to the
individual. Every system can be tailored to meet all
requirements quickly and easily.
2.
Specifications
Table 1:
Specifications
Temperature Range
Humidity
Power Source
Stand-By Current
Current Draw in
Alarm Condition
Current Draw in
Alarm Condition with
Codepad
Back-Up Battery
Dimensions (Case,
packed in carton)
Weight
Supplier Code
New Zealand
Telepermit
Malaysia Approval
Number
Bosch Security Systems | 3/04 | SUB-MA48XO-3318
o
o
0
C to +45
C
o
o
(+32
F to +113
F)
10% to 95%
TF008 Plug Pack –
240 V/18 VAC @ 1.3 A
65 mA
115 mA
105 mA
6 Ah/12 VDC Rechargeable
Sealed Lead Acid Battery
306 mm x 262 mm x 84 mm
(12.05 in. x 10.31 in. x 3.31 in.)
2.5 kg
(5.51 lb.)
N771
Solution Ultima 844 –
PTC 211/98/085
Solution Ultima 862 –
PTC 211/98/084
Solution Ultima 880 –
PTC 211/98/083
Pending
Introduction
The Austel permit issued for this product
is subject to the following condition:
The Solution Ultima Series Control Panel
may only be powered by a Bosch Security
Systems TF008 plug pack (Approval
Number Q92128).
Test the sirens, strobe, and zones at
weekly intervals. See Section 14. Testing
for further information.
3.
Codepad Indicators
Figure 1:
CP5 Eight Zone LED Codepad
Figure 2:
CP5 Eight Zone LCD Codepad
The codepad is the communications interface
between you and your alarm system. Use the
codepad to issue commands. The codepad offers
both visual and audible indications that guide you
through the general operation.
The codepad incorporates numerous indicators.
There are zone indicators used to show the condition
of each zone. Four other indicators show general
status. The following pages outline a list of situations
and the relevant indicators that are seen.
EN | 5
Hide quick links:
Advertisement
Table of Contents
