Bosch CC484 Operator's Manual page 21

CC484/CC486/CC488 | Operators Manual | 22.
Table 16: continued
Term
Sensor Watch
Silent Alarm
STAY Mode 1
STAY Mode 2
Telco Arm Sequence
Telco Disarm
Sequence
Unsealed
User Code
Zones
24-Hour Zones
Bosch Security Systems | 3/04 | SUB-MA48XO-3318
Description
Use the control panel to recognise detection devices that have stopped working, or
view a PIR detector that is blocked (unable to detect any movement over the
duration of the time programmed by your installer).
Zones that your installer programs for silent operation. When the zone programmed
for silent operation is violated during the armed period, your alarm system
communicates with the monitoring station without sounding the sirens.
Automatically isolates zones when your system is armed in STAY Mode 1. Only your
installer can program zones to be isolated automatically in STAY Mode 1.
Automatically isolates zones when your system is armed in STAY Mode 2. Only the
Master Code holder can program zones to be isolated automatically in STAY Mode
2.
Automatically calls the telephone exchange and diverts your telephone number to
another telephone when the system is armed in AWAY mode. (In Australia, this
feature is called Call Forward.)
Automatically calls the telephone exchange without forwarding your telephone
number.
Refers to zone status. A zone is unsealed when a zone is violated. The
corresponding zone indicator displays on the codepad.
Personal Identification Number (PIN) the operator uses to arm and disarm the
system.
Monitored input used to trigger an alarm condition when violated.
Monitored input programmed to trigger an alarm condition when violated when the
system is armed or disarmed 24 hours a day.
Glossary of Terms EN | 21