Table of Contents
Advertisement
CC484/CC486/CC488 | Operators Manual | 14.
The examples given in this feature are
only applicable to Australia.
Call Forward – Immediate On
You can redirect calls to anywhere in Australia,
including mobile phones, pagers, and answering
services. When Call Forward is turned on, your
telephone does not ring.
Call Forward – No Answer
When your telephone is not answered within 20
seconds, this feature redirects all incoming calls to
another number anywhere in Australia. You can
still make outgoing calls.
How to Program the Telco Arm Sequence
1. Enter your four character Master Code,
followed by the [3] and [#] keys (for example,
[25803#]).
Three beeps sound and the STAY and AWAY
indicators flash.
2. Press the [1] key followed by the [#] key to
select the Telco Arm Sequence. Three beeps
sound.
3. Enter the Call Forward Sequence (for
example, [*61][Phone Number][#] to program
the Call Forward - No Answer Sequence or
[*21][Phone Number][#] to program the Call
Forward Immediate Sequence).
To program an "*" in the Telco Arm
Sequence, enter [*1], and to program a "#" in
the Telco Arm Sequence, enter [*2].
4. Press the [#] key when finished.
Two beeps sound, and the STAY and AWAY
indicators turn off.
To disable the Telco Arm Sequence,
enter the Call Forward Sequence as
[*4] (break) for Step 3.
13.2
Telco Disarm Sequence
Use this function to automatically disable the call
forward sequence upon disarming the system.
How to Program the Telco Disarm Sequence
1. Enter your four-character Master Code,
followed by the [3] and [#] keys (for example,
[25803#]).
Three beeps sound, and the STAY and
AWAY indicators flash.
2. Press the [2] key followed by the [#] key to
select the Telco Disarm Sequence. Three
beeps sound.
3. Enter the Call Forward Disable Sequence (for
example, [#61#] to disable the No Answer
Call Forward sequence, or [#21#] to disable
the Call Forward Immediate Sequence).
Bosch Security Systems | 3/04 | SUB-MA48XO-3318
Testing
To program a "#" in the Telco Disarm
Sequence, enter [*2].
4. Press the [#] key when finished.
Two beeps sound, and the STAY and AWAY
indicators turn off.
To disable the Telco Disarm Sequence,
enter the Call Forward Sequence as
[*4] (break) for Step 3.
Table 12: Telco Arm/Disarm Dialling Digits
Digit
Number to
Required
Program
0
0
1
1
2
2
3
3
4
4
5
5
6
6
7
7
14. Testing
The following functions let you confirm that your
system is operating correctly:
14.1
Horn Speaker Test
Hold the [1] key until two beeps sound.
The horn speaker sounds for 2 seconds.
14.2
Bell Test
Hold the [2] key until two beeps sound.
The bell output operates for 2 seconds.
14.3
Strobe Test
1. Hold the [3] key until three beeps sound.
The strobe flashes.
2. Hold the [3] key until two beeps sound.
The strobe stops flashing.
14.4
Walk Test Mode
Use Walk Test Mode to test detection devices to
ensure that they are operating correctly. Every
time you test a zone, the codepad sounds one long
beep, and the horn speaker sounds one short beep
to indicate that the zone is activated when testing.
1. Enter your four character Master Code,
followed by the [7] and [#] keys (for example,
[25807#]).
Three beeps sound, and the STAY and
AWAY indicators flash. The codepad beeps
once every second while the system is in Walk
Test Mode.
EN | 14
Digit
Number to
Required
Program
8
8
9
9
*
*1
#
*2
4-second
*3
Pause
Break
*4
Hide quick links:
Advertisement
Table of Contents
