Operating Features - Kenwood TK-782 Service Manual

1. Operation Features
The TK-782 is a VHF FM radio designed in DTMF/DMS
model.
This transceiver can handle up to 250 groups with 250
channels in each group.
You can use option signalling which is DTMF or DMS (Digi-
tal Message System-FFSK signalling) for every channel.
2. Transceiver Controls and Indicators (Fig. 1)
2-1. Front Panel Controls
All the keys on the front panel are momentary-type push
buttons. The functions of these keys are explained below.
! POWER key
Transceiver POWER key. When the power is switched
off, all the parameters, such as the group and channel, are
stored in memory. When the power is switched on again,
the transceiver returns to the previous conditions.
! CHANNEL UP/DOWN key
! CALL key (Programmable)
! " key (Programmable)
! A, B, C and D key (Programmable)
! VOLUME UP/DOWN key (Programmable)
! BUSY/TX LED
The BUSY indicator (Green LED) shows that the channel
is in use. The TX indicator (Red LED) shows that you are
transmitting.
2-2. Programmable Keys
The FPU (KPG-77D) enables programmable keys to select
the following functions.
" Auto Dial
To transmit the stored DTMF code automatically. When
you select DTMF encode in the "Auto dial mode" menu, Auto
dial, Redial, Dial ID and Store
Press the [Auto dial] key to enter the "Auto dial mode".
Select the desired number to send. It is use the [Channel
up] and [Channel down] keys, or the [2] and [8] keys on the
microphone to select. Press the [
bers.

OPERATING FEATURES /

Send modes are available.
] key to transmit the num-
*
!
!
!
!
!
!
!
"
TK-782
5