Kenwood TK-782 Service Manual page 35

TK-782
4. Fitting the Control Panel Upside Down
The TK-782 control panel can be fitted upside down, so
the transceiver can be mounted with its internal speaker (in
the upper half of the case) facing down in your car.
1. Remove the control panel and the TX-RX unit (B/2) control
section. (Fig. 5)
2. Fold the flat cable (
3. Rotate the control section (
4. Insert the flat cable into the control section connector,
CN502 ( ).
#
5. Mount the control section on the transceiver (
!
!
"
34
INSTALLATION /
Fig. 5 /
) in the opposite direction (
) 180 degrees (
! "
$
"
#
$
$
CN502
#
Fig. 6 /
6. Rotate the control panel 180 degrees and mount it on the
transceiver. Refit the two halves of the case to complete
installation. (Fig. 7)
).
).
).
Fig. 7 /