Self Programming Mode - Kenwood TK-782 Service Manual

TK-782

7. Self Programming Mode

Write mode for frequency data and signalling etc. Mainly
used by the person maintaining the user equipment.
7-1. Channel Setting Mode
Each channel can be setup in its action mode by using
the panel keys.
! Pressing ["] while "SELF PROG" is diaplyed will change
to channel setting mode.
! Press [D ] to select a setup item, then press [Channel
up/down] to change the selection.
! By pressing [ C], the displayed information is stored in
memory, and the next item appears. By pressing [D
the displayed information is not stored in memory, and
the next item appears.
! Press["] to return to the original display ("SELF PROG").
The setup items for channel setting mode are listed be-
low.
Setup function Display
(3 character)
Channel selection CH or GRP
RX frequency RXF
RX signalling RXS
TX frequency TXF
TX signalling TXS
Scan del/add SCN
RF power PWR
Beat shift SFT
Wide/Narrow W/N
Compander CMP
26
REALIGNMENT /
Remarks
[CALL] : Switches frequency on/off
[B] : Changes the step value
between 5kHz, 6.25kHz, and
1MHz
[CALL] : Switches between off,
QT, and DQT.
[B] : Switches between 1 step
and standard
[A] : Switches between DQT
normal and invert
Same as RX frequency
Same as RX signalling
DEL/ADD
HIGH/LOW
YES/NO
WIDE/NARROW
ON/OFF
!
!
!
],
!