Iso Mount Radio Provision With Pocket - Metra Electronics 99-7008 Installation Instructions Manual

ISO MOUNT RADIO WITH POCKET
1 Align the holes in the ISO brackets with
the holes in the radio. Mount the
brackets to the radio using screws
supplied with the radio. (Figure A)
Slide the radio/bracket assembly into the
2
radio housing until it snaps into place.
(Figure B)
3 Snap the ISO trim-plate onto the front of
the assembled radio and housing.
(Figure C)
Continue to final assembly.
NOTE: To remove the radio unsnap and remove the ISO trim-plate. Using a flat
blade screwdriver disengage ISO brackets from the radio housing and slide
radio out of radio housing.
99-7008
3
KIT ASSEMBL Y
A
B
C