Iso Mount Radio Provision With Pocket - Metra Electronics 99-3107S Installation Instructions Manual

ISO mount radio provision with pocket

1. Locate the factory wiring harness in the
dash. Metra recommends using the
proper mating adapter from Metra or
AXXESS. Re-connect the negative
battery terminal and test the unit for
proper operation.
2. Mount the ISO brackets to the
aftermarket radio using the screws
supplied with the radio. (Figure B)
3. Slide the the radio into the radio
opening of the radio housing. (Figure C)
4. Slide the the assembly into the sub
dash and secure with the supplied (4)
silver pan head phillips screws (small
on top and large on bottom). (Figure D)
5. Snap the trim plate/pocket onto the
radio housing. (Figure E)
6. Reassemble dash in reverse order
of disassembly.
(Figure A)
Kit Assembly 99-3107
6
(Figure B)
(Figure C)
AUTO
(Figure D)