Iso Mount Radio Provision With Pocket - Metra Electronics 99-6511 Installation Instructions Manual

ISO MOUNT RADIO PROVISION WITH POCKET

*
Note: Refer also to the instructions included with the aftermarket radio.
1 Mount the ISO Brackets to the radio
using the screws supplied with the
radio. (Figure A)
2 Slide the radio into the radio opening
until it snaps into place. (Figure B)
3 Snap the ISO Trim Plate onto the front
of the Radio Housing. (Figure B)
Continue to final assembly.
99-6511 KIT ASSEMBL Y
9
A
B