Page 1
KIT FEATURES • DIN Mount Radio Provision • ISO Mount Radio Provision KIT COMPONENTS A) Radio Housing • B) ISO Snap In Brackets • C) Trim Plate TOOLS REQUIRED: Small Flat Blade Screwdriver/ Panel Removal Tool • Phillips Screwdriver 1-800-221-0932 www.metraonline.com...
Page 2
Kit Assembly - DIN Mount Radio Provision ....... . . 2 - ISO DIN Mount Radio Provision .
Remove (2) Phillips head screws from above instrument cluster. (Figure A) Unclip and remove the radio trim panel. (Figure B) Remove (4) Phillips screws securing the radio. Unplug and remove radio. (Figure C) Continue to kit assembly. 99-7502 DASH DISASSEMBL Y...
DIN MOUNT RADIO PROVISION Note: Refer also to the instructions included with the aftermarket radio. Slide the DIN cage into the Radio Housing and secure by bending the metal locking tabs outward. (Figure A) Slide the aftermarket radio into the cage until it snaps into place.
ISO DIN MOUNT RADIO PROVISION Note: Refer also to the instructions included with the aftermarket radio. Mount the ISO Brackets to the radio using the screws supplied with the radio. (Figure A) 2 Slide the radio into the radio housing until it snaps into place.
Dimmer ....Orange / White *NOTE: When a Black wire is not present, ground radio to vehicle chassis. All colors may not be present on all leads due to manufacturer’s specifications.