Page 1
INSTALLATION INSTRUCTIONS FOR PART 99-7330 KIA Spectra/Spectra 5 99-7330 KIT FEATURES • Recessed DIN Mount Radio Provision with Pocket • ISO Mount Radio Provision with Pocket KIT COMPONENTS A) Radio Housing B) ISO Brackets C) Trim Plate WIRING AND ANTENNA CONNECTIONS (Sold Separately) Harness: •...
Final Assembly ......... . 4 *Note: Refer also to the instructions included with the aftermarket radio. 99-7330 NOWLEDGE IS Enhance your installation and fabrication skills by enrolling in the most recognized and respected mobile electronics school in our industry.
Unclip and remove the trim panel sur- rounding the radio and including the a/c vents. (Figure A) Remove (4) Phillips screws securing the radio. Unplug and remove radio. (Figure B) Continue to kit assembly. 99-7330 DASH DISASSEMBL Y...
Slide the DIN cage into the Radio Housing and secure by bending the metal locking tabs outward. (Figure A) Slide the aftermarket radio into the DIN cage/housing assembly until it snaps into place. (Figure B) Continue to final assembly. 99-7330 KIT ASSEMBL Y...
(Figure A) Slide the radio/bracket assembly into the radio housing until the assembly snaps into place. (Figure B) Snap the ISO trim plate onto the radio and housing assembly. (Figure B) Continue to final assembly. 99-7330 KIT ASSEMBL Y...
*NOTE: When a Black wire is not present, ground radio to vehicle chassis. All colors may not be present on all leads due to manufacturer’s specifications. 99-7330 FINAL ASSEMBL Y (A) Strip wire ends back 1/2" B) Twist ends together...