Philips Vari-lite VL3500 Wash User Manual page 50

❋
VARI LITE® - VL3500™ W
To use control channel functions:
Step 1. Select an action to be sent.
Step 2. Set control channel value for desired action (for example, 84 for reset). Hold value for at
least 3 seconds (when applicable).
Step 3. Set control channel value to zero. (This must occur without any scaling values. Action will
be voided if other values are detected between action value and zero.) Some functions do not
require this method. Simply set to value and desired effect will occur.
Note: A numerical keypad is required for sending values. An encoder or fader does not allow for a
quick value change, which is required to effect the control functions. However, the encoders on some
consoles include discreet value capability.
32
L U '
ASH UMINAIRE SER
01 J un e 20 09
M
S ANUAL
02 .9 686 .00 01 B