Philips Vari-lite VL3500 Wash User Manual page 35

Installing in Truss:
Step 1. Using two people, lift luminaire into mounting position.
Step 2. Secure in place with truss hook. Ensure truss hook hardware that locks hook in place (e.g.
wing bolt) is properly tightened and that luminaire is fully supported.
Step 3. Attach safety cable (as required) as follows:
a. Connect one end of cable to luminaire handle.
b. Loop at least once around truss/pipe and attach other end of cable to other handle.
Step 4. Connect power and data cables according to procedure given in
Power" on page
Safety Cable:
Recommended for all hanging installations
and may be required by local codes.
23" (584 mm)
Head Length
27"
(686 mm)
Light Beam Projects Intense Heat:
Do not illuminate objects within 3.5 m (11.5 feet).
See Warnings and Cautions in this chapter.
02.96 86.000 1 B
18.
18"
(457 mm)
28"
(711 mm)
Figure 2-4: Hanging Configuration and Dimensions
01 J un e 20 09
I : I
NSTALLATION NSTALLATION
14.5"
(368 mm)
12" (305 mm)
Tilt Axis
P
ROCEDURES
"Connecting Data and
Top View
Safety Cable
(not included)
Loop at
least once
Handles are approved
safety cable anchor points.
27"
(686 mm)
20"
(508 mm)
2
6"
(152 mm)
17