Powering Down And Packing Up; Pack-Up Cues For Shipping: Vl3500™ Wash Luminaire - Philips Vari-lite VL3500 Wash User Manual

Powering Down and Packing Up

Pack-Up Cues for Shipping: VL3500™ Wash Luminaire
To prepare the VL3500™ Wash Luminaire for shipment, Vari-Lite recommends specific pack-up cues
and console default values. In particular, to minimize the possibility of damage during transport, set
the DMX values for the VARI❋BRITE
complete list of all recommended DMX shipping default values, see
The DMX values in
values are set as the console default states, a simple release of the fixture initiates the pack-up cue.
If a particular console does not set the VL3500™ Wash Luminaire to these default values, Vari-Lite
strongly recommends the creation of a "pack-up" cue that, at the least, sets VARI❋BRITE
values to 0, and preferably sets all of the default values recommended in
Table 2-2: Pack-up Cues and Console Default States for VL3500™ Wash Luminaires
DMX Channel
If no console is present, then a completed calibration routine will ensure that these defaults are met.
02.96 86.000 1 B
I
Table 2-2 should be included as the default settings for console profiles. If these
Parameter
1
2 Hi Byte Pan
3 Lo Byte Pan
4
5 Lo Byte Tilt
❋
6
VARI
7
8 CTO Mixer
9 Cyan (Blue) Mixer
10 Yellow (Amber) Mixer
11 Magenta Mixer
12 Color Wheel 1
13 Color Wheel 2
14
15 Aperture Wheel
16 Focus Time
17 Color Time
18 Beam Time
19 Control Channel
: P
NSTALLATION OWERING
®
mode and Zoom to 0 (zero) prior to shipment. For the
Intensity
Hi Byte Tilt
BRITE ® Mode
Zoom
Strobe
01 J un e 20 09
D P
OWN AND ACKING
Table 2-2 below.
Table 2-2.
Recommended Default Value
0
32768 (mid position)
32768 (mid position)
0 (closed)
0 (narrow)
0 (open)
0 (open)
0 (open)
0 (open)
0
0
0 (open)
0
255
255
255
0
2
U
P
™
and Zoom
21