Figure 30. Set Up System Account - Chamberlain IPAC Administrator's Manual

IPAC Server Administrator's Manual
NOTE:
The password that is set on this first page is used to control access to
the console configuration for IPAC Server™. After setting up your
initial Administrator, you will need to use that password with the

username 'admin' to log into the console. The password may then be
changed from the console if necessary.
Do not lose this password, or you will not be able to log into the
console interface in the future without it.
NOTE:
The Username and Password fields are required for all Administrators.

The username and password combination determine the
Administrator's access to the IPAC Server™ application, and must be
entered the next time the Administrator logs in.
8. Click Save and continue to Account Setup. The Edit Account Details page
displays.
To set up the System Account:
1. After defining a System Account Administrator, you are prompted to name the
System Account and identify a main contact for it. Other than Name, all of the
fields on this page are optional.
46
Set up System Account
Figure 30.
Page 46 of 334