Figure 7. Ipac Server™ Direct Console Static Ip Setup - Chamberlain IPAC Administrator's Manual

IPAC Server Administrator's Manual
Direct console:
The IPAC Server™ appliance supports a USB keyboard and monitor to present a basic
network configuration console-based interface. It is generally necessary to configure a static
IP address for the IPAC Server™ appliance. The Network Settings dialog prompts for static
address parameters.
NOTE :

If DHCP is required, please use the initial static IP address for the
appliance to log into the main application and select DHCP
addressing.
1. Connect a VGA monitor and keyboard to appropriate ports on the IPAC Server™
appliance
2. Log in with username "admin" and no password (for first login) or use the
initially configured admin password.
3. To set a static IP address for the LAN, select Network Settings from the main
menu.
4. Enter the appropriate IP address information.
5. Press Enter to save settings.
24
Figure 7. IPAC Server™ direct console static IP setup
Page 24 of 334