Table of Contents
Advertisement
IPAC Server Administrator's Manual
Alarm Acknowledge Checkbox. Located to the left of each alarm event, this
o
checkbox allows the administrator to select an event(s).
Time. The time when the event occurred.
o
Event. The alarm or alert system activity event, such as Door Forced Open or
o
Failed Access Attempts.
Details. The device where the alarm event occurred and if multiple alarms
o
have occurred in the same location, the number of events will follow the
location in parentheses.
Acknowledge. Shows the number of selected alarm events and links to the
o
Alarm Details popup window. At least one alarm must be selected for the
Acknowledge link to work.
Additional Information (+). This button calls up the Alarm Details popup
o
window for a specific alarm event, discussed further in the Alarm Text section
below.
Swipe & Show
•
User. The user name as well as the date and time of the swipe event.
o
Device. A link to select which device to monitor in the upper right corner of
o
the Swipe & Show display area.
Photo. A display of the photo on record pulled from the user profile. If no
o
photo is available, the Default User Icon is presented.
Image Gallery. Shows the last eight valid credential reads displaying the user
o
name, time and date stamp, and photo on record from the user profile. If no
photo is available, the Default User Icon is presented.
NOTE:
With systems that have large amounts of data, the IPAC Server will
begin to immediately populate the device status, hardware status, and
schedule status pages but may take some time to completely finish
loading all devices, hardware, and schedules.
Device Status
Name. The name of the logical device configured for use at your installation.
o
Clicking the device name takes you to the corresponding Device Details page.
In the case of Guard Tours, clicking on the arrow icon will expand or close the
details of the Guard Tour.
Status. The current output behavior status of the logical device configured for
o
use at your installation. (The status of devices configured for an output
behavior of Follow will not be displayed.)
If appropriate, buttons to control the state of the device will appear as well.
o
If applicable, previously created Display Filters will be accessible via a
o
dropdown list.
Hardware Status
•
Name. The name of the control panel, or an indication that the panel has not
o
been configured.
28
Page 28 of 334
Advertisement
Table of Contents
