Table of Contents
Advertisement
IPAC Server Administrator's Manual
Live Map/Floorplan
Once a map/floorplan has been created, icons added, and regions established, then an
administrator with appropriate permissions can utilize the Live Map feature under the
Dashboard link.
To use the Live Map feature:
1. Scroll over the Status link. The sub-navigation menu displays.
2. From the sub-navigation menu, click the Maps/Floorplans link. A popup window
with a list of map names appears. Select the map you wish to use.
3. The Live Map page will appear with the icons and regions in their current states
(either normal or alarm).
NOTE:
An icon representing a programmable device or door will appear as its
normal color (default is green) if in a normal state (such as unlocked or
locked). The icon will switch to its alarm color (default red) if in an
alarm state such as door ajar or wire cut.
4. To interact with a device, scroll over the icon representing that device. The
name and current status of the device will appear in a popup window.
5. If the device can be controlled via the browser, if you click on the icon, a button
will appear (for example, Pulse for a door).
6. Zoom – to zoom in, out, or reset the default size of the live map, there are three
buttons in the upper right hand corner of the screen (+), (-), and (fit).
7. Choose Map – to choose a new map for live view, click on the Choose Map
button and a popup window with available maps will appear. Select the map
you wish to view live and you are returned to the Live Map page.
41
View Live Map
Figure 27.
Page 41 of 334
Advertisement
Table of Contents
