Table of Contents
Advertisement
IPAC Server Administrator's Manual
Viewing Video
When cameras and DVRs are in use, administrators with appropriate permissions have two
options for viewing video. Administrators may watch live video via Live Status on the
Dashboard (if the camera is set up to be controlled from the browser) or watch video
related to specific access events under the Activity Log on the Dashboard.
NOTE: Live Video and Pulsing Doors/Devices
In order to pulse a door/device using live video, the door/device being
viewed must have the Control From Browser box checked under its
device details. A device must also have its output set to Pulse.
To view live video (with a Pulse button)
1. Scroll over the Status link. The sub-navigation menu displays.
2. Click on the Dashboard link. The Dashboard will display.
3. Under the Device Status tab of the Dashboard, locate the door at which you
want to view live video.
4. Click the Camera Icon (
window will appear.
NOTE: Playback Controls
It is important to note that not all supported DVRs provide playback
controls as shown above in Viewing Live Video.
5. Use the buttons below the video to control play (if available).
104
) button next to door/device. The live video pop-up
Viewing Live Video
Figure 60.
Page 104 of 334
Advertisement
Table of Contents
