Table of Contents
Advertisement
IPAC Server Administrator's Manual
SNMP Agent Settings
These actions should only be performed by your network administrator.
To configure SNMP Agent Settings
1. Scroll over the System link. The sub-navigation menu displays.
2. From the sub-navigation menu, click Settings. The Settings sub-navigation
menu displays.
3. From the Settings sub-navigation menu, click SNMP Agent Settings. The SNMP
Agent Settings page displays.
4. Check the box next to "Enable." It is left unchecked by default.
5. Enter the community name.
6. Enter the server port next to the respective field.
7. Click Save. You are returned to the System page.
266
System: SNMP Agent Settings
Figure 152.
Page 266 of 334
Advertisement
Table of Contents
