Table of Contents
Advertisement
IPAC Server Administrator's Manual
Control Panel Options
To add a new control panel:
You may choose to add a new control panel that has not yet connected to the IPAC Server™
appliance by following these steps:
1. Scroll over the Configuration link. The sub-navigation menu displays.
2. From the Devices link, click Control Panels from the dropdown list. The Control
Panels list displays.
3. Click Add New Control Panel.
4. Enter the Panel ID Number. This is the number that begins with the letters "CP"
and can be found printed on the packaging, inside the panel's cover, or on a
sticker on the panel's main board.
5. Enter a name for the panel.
6. Enter the location of the panel.
7. If desired, enter the time interval when the control panel will upload a panel log
file.
8. Enter the time zone for the panel.
9. Choose whether you are adding an IPAC SYSTEM panel, an IPAC SYSTEM panel,
an HID E-400/ERW-400, IPDC-1, or IPDC-2 device.
10. Click Save.
To edit a control panel:
1. Scroll over the Configuration link. The sub-navigation menu displays.
2. From the Devices link, click Control Panels from the dropdown list. The Control
Panels list displays.
110
Figure 64.
Add a Control Panel
Page 110 of 334
Advertisement
Table of Contents
