Adjustment Of The Scanner Section - Toshiba e-STUDIO2330C Service Manual

7.7

Adjustment of the Scanner Section

7.7.1 Adjustment carriages-1 and -2 positions
(1) Move the carriage-2 toward the exit side.
(2) Loosen the screws fixing the front side pulley
bracket, make the sections A and B of the
carriage-2 touch with the inside of the exit
side frame and screw them up.
(3) Put the carriage-1 on the rail, make the
sections C and D of it touch with the inside of
the exit frame and screw up the front/rear
side of the bracket to fix it.
Note:
Make sure that the sections A and B of the
carriage-2 touch with the exit side frame.
e-STUDIO2330C/2820C/2830C/3520C/3530C/4520C
SCANNER
Carriage-2
[ Rear ]
Exit side frame
B
Bracket
Carriage-1
D
[ Rear ]
Enlarged view of carriage
© 2008, 2009 TOSHIBA TEC CORPORATION All rights reserved
7 - 30
Pulley bracket
[ Front ]
Enlarged view of carriage
A
Fig. 7-59
Bracket
Exit frame
C
[ Front ]
Fig. 7-60