Adjustment Of Saturation - Toshiba e-STUDIO2330C Service Manual

Hide thumbs Also See for e-STUDIO2330C:

Table of Contents

Adjustment of saturation

The saturation of the scanned image is adjusted for color-scanning.

Original mode

Printed Image

While pressing [0] and [5] simultaneously, turn the power ON.

Key in the codes and press the [START] button.

Key in the adjustment values. Acceptable values: 0 to 255.

(To correct the value once keyed in, press the [CLEAR] button.)

Press the [ENTER] or [INTERRUPT] button to store the value in the memory. → The equipment

goes back to the ready state.

Let the equipment restart and perform the scanning job.

If the desired image has not been attained, repeat step (1) to (5).

e-STUDIO2330C/2820C/2830C/3520C/3530C/4520C

IMAGE PROCESSING

The larger the value is, the brighter the image becomes.

The smaller the value is, the duller the image becomes.

Acceptable values: 0 to 255 (Default: 128)

Show Quick Links

Table of Contents