Oven Light Removal; Grill Burner Removal; Grill Ignitor Removal; Griddle Thermostat Removal - Viking VGR30 Service Manual

OVEN LIGHT REMOVAL

1. Shut off power to the oven.
2. Unscrew the light cover from the light socket.
3. Turn the light socket to the left 1/4 turn.
4. Pull the light socket forward and disconnect the
wires one lead at a time and connect to the
appropriate terminal on the replacement light
socket.

GRILL BURNER REMOVAL

1. Remove the grill grates, grate supports, flame
spreader and the burner shield.
2. Remove the screw at the front and rear of the
burner.
3. Lift the burner off of the orifice and remove from
the burner box.
GRIDDLE BURNER / IGNITOR REMOVAL
1. Shut off power to the oven.
2. Remove the grates, burner bowls, and grate
supports on either side of the griddle. Lift and
remove the griddle.
3. Remove two (2) securing the ignitor to the griddle
box. Disconnect the wiring from the ignitor.
4. Remove four (4) screws securing the venturi cover
and remove the cover.
5. Remove the burner tube from the griddle box.

GRIDDLE THERMOSTAT REMOVAL

1. Shut off power to the unit.
2. Remove the control panel. (See control panel
removal.)
3. Remove the griddle plate. (See griddle removal.)
4. Remove the thermostat bulb from the clips in the
griddle box.
5. Carefully pull the thermostat bulb from the opening
in front of the griddle box.
6. Remove the thermostat knob.
7. Remove two (2) screws securing the thermostat to
the control panel.
8. Remove the wire leads and connect to the
replacement thermostat.
30