4.2.2.7 Removing USB board
(1) Remove the two screws(black)
to remove the beam-support
.
(2) Remove the two long type screws(black)
to remove the stopper Assembly
.
(3) Remove the two long screws(black) for metal-use (black) , the four small resin-use
screws(black)
and then the stay left inner cover
.
(4) Remove the two screws(black, with washer)
to take out the USB board
.
(5) Remove the connector from the USB board
.
(long type)
(with washer)
connector
(for metal)
66
Service Manual
Y108500-4