6.5.3.(4) Vertical lines are printed
Thin vertical lines (with color) (See Figure 7.2 D )
(4-1)
Confirmation Items
(4-1-1) ID unit condition
Filming of ID unit
(4-2) Thin vertical lines (without color) (See Figure 7.2 F )
Confirmation Items
(4-2-1) LED head condition
LED head
(4-2-2) Paper feeding condition
Feeding route
198
Confirmation Tasks
Print without toner?
Confirmation Tasks
Does any foreign adhere to light-emitting surface of
SELFOC lens of LED head?
Check whether the barricade resulted from unfixed toner
scratched during unfixed paper transport route exists.
Service Manual
Action at NG
Replace the toner
cartridge with a new
one. If trouble is
occurred again after
replacing, please
replace ID unit with
a new one. When
trying to use a new
ID unit, please be
careful not to break
the fuse with jig
inside the ID unit.
(Please refer to page
176)
Action at NG
Remove the foreign.
Remove the
barricade.
Y108500-4